|
DVD's: Allow
one to two weeks for delivery.
DVD
- SOA TV Best Of Crappies
- $15.95 plus $3 for shipping (shipping
included in price at checkout)
After a ton of requests we
have finally completed this Best Of Crappies, Southern Outdoor
Adventures Television two DVD set. Eight (8) of the best thirty
minute Crappie fishing episodes are included in this two DVD set.
All of the TV commercials have been removed. Over four hours of Southern Outdoor Adventures Crappie fishing
action. Trolling, Strolling, Tight-Lining, Structure Fishing, Artificial
Bait and Live Bait are all
covered in this comprehensive collection of archived television
shows. We show you everything you need to know about Crappie fishing
for almost any time of year. This two DVD set will make you a
better Crappie fisherman. Map graphics, how to locate crappies any
time of year, trolling rigs, live bait rigs, depth to fish, time of
year to use each technique, cleaning crappies, how to use your
electronics to find Crappies - too much to list here!
DVD - Killer Tricks for
Trolling - $15 plus $3 for shipping (shipping
included in price at checkout)
This
DVD
covers trolling for Crappies from A - Z. All my
secrets and setups are on this DVD.
Over 60 minutes of instruction.
All digital filming and
reproduction has allowed me to produce a top quality DVD.
This one is $15 plus shipping and handling.* Get your copy
now!
DVD - Structure Fishing for
Crappies
- $10 plus $3 for shipping (shipping included in
price at checkout)
This Structure Fishing for
Crappies DVD runs 45
minutes. Filmed entirely on Kerr Lake here in North
Carolina. There is 40 minutes of instruction, 4 minutes
of me catching fish with the techniques and equipment I
show you, and 2 minutes of ads. This DVD is a bargain at
ten bucks, and I guarantee you will learn something new. Get your copy
now!
DVD - Practical Structure Fishing
& Trolling - $9.95 plus $2 for
shipping (shipping included in price at
checkout)
This DVD runs 60 minutes
and is for those who like to see a lot of fish being caught. I apply
most of the structure fishing tactics you see on the Secrets For
Structure DVD and some of the techniques on the Killer Tricks For
Trolling DVD. The structure fishing show is filmed on Kerr Lake in
North Carolina. I use the rod holders in real situations. I show you
how to use your depth finder to locate structure. I demonstrate how
to rig live bait and jigs and I catch a bunch of fish on live bait
and jigs. The trolling show is filmed on a lake off the Lumber River
in Eastern NC. In this show you will learn how to catch crappies
trolling shallow water in fall with artificial baits. I close this
one by catching a two and half pound monster crappie. You wanted
lots of fish - you got it!
Crappie Killer Rod
Holders
Allow two to three weeks for
delivery. We custom build each rod holder upon receipt of order!
Crappie Killer Rod Holders are
made of steel, not aluminum. They are super tough and will last a
long, long time. Each rod holder assembly was designed for a
specific purpose. They are adjustable up and down and side to side.
All of our rod holders mount on a simple base which allows the rod
holder "T" bar to be removed and stored.
The new Crappie Killer "ARH"
(Articulated Rod Holder) is the most versatile rod holder assembly
you'll ever find. It is adjustable in so many directions you simply
have to see it to believe it. You can watch the demonstration video
to see what I mean. Click here to watch a short two minute clip on
the new Crappie
Killer ARH.
The "Shorty" is a
multipurpose rod holder. It's great for trolling or tight lining.
This one is popular in states where there is a two rod per person
limit. It's also popular with the Walleye fishermen.
The "Killer" is our
original four rod holder assembly. Fish four rods over structure,
drift or troll. This assembly is strong and rigid. It will not flex,
wobble or bend with four long trolling rods in it. This unit is
designed specifically for bass boats that have tight knee clearance
in the front. You can mount one on each side of your pedestal seat
and fish eight rods with ease. I have multiple bases mounted on my
boat so I can move my rod holders around to suit any style or
fishing conditions.
All of our rod holders can be
built to suit your needs. Although we have standard widths, heights
and colors, we can accommodate your specifications. It may take a
little extra time to get a custom height and color, but we are happy
to do it. We can even get them chrome plated!
"The Killer" four rod
holder with "T" bar and base mount.
Rod Holders - $64.95 plus $10 for shipping
|
The picture below really doesn't do these
rod holders justice. Click on the "view commercial"
tab to watch a 30 second clip. This may take a minute or so to
load, and you will need media player to see the video.
[View Commercial]
Standard 18" Rod Holder
- Mounted On Base |
I have had a lot of requests
to sell the rod holders I use. I first made a set of these for
myself and my partner and fellow guide Jay Pruett in 1996.
Being a designer,
and having some access to a welder and some shop tools, I
went to work. The rod holder you see in the photograph is
the result.
|
I have
used these rod holders for more than 15 years now. The very first set I
ever made is still in my boat and they are still in
good condition. If installed properly, a 200 pound man
can sit on them with out fear of breaking them. I'm not
joking!
Bottom line, they
are tough, and will stand up to years and years of use (abuse).
I generally make
them 18" tall and 24" wide with four rod
holders. This provides adequate foot and knee clearance
as well as easy access from a standard height fishing
seat in a bass boat. I use 13' rods in these holders and
they do not flex or distort in any way. The rod holders
can be adjusted axially and up and down to allow any angle
or height desired. I like my rod tips just off the water
when trolling. So it is important to be able to adjust
them quickly and easily. Once you tighten the hardware
down it stays tight until you put a wrench to it.
I sell them for
$64.95
each plus $10 dollars shipping. Buy two or more for $59.95 each. That includes the "T"-bar,
4 rod holders, mounting base and all the hardware. You can pick your color but I
prefer black.
The rod holders
have protective rubber skirts to protect the reel seats
from damage.
Crappie
Killer (Standard) Shipping
is $10 per rod holder and it is included at check out.
One Rod Holder At $64.95 Each (Enter
Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
Two
Rod Holders At $59.95
Each (Enter Qty 1 At Pay Pal Screen)
(shipping included in price at checkout)
Three
Rod Holders At $59.95
Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
Four
Rod Holders At $59.95
Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
Crappie
Killer (Articulated Rod Holder) Shipping
is $10 per rod holder and it is included at check out.
This
rod holder can be supplied with two different base mounts. The
standard base is the 1.75" X 4" cleat style mount. You
remove your cleat, use it to mark the hole pattern on the base plate
and then drill it to match. Use your existing cleat hardware to
mount the base and the rod holder. Option two is a 3" square
base plate with four pre-drilled holes, one at each corner. The
3" base plate can be mounted to any flat surface. Please make
sure you choose the option you want below. You can also buy extra
bases if needed, see last item ($5.00 shipping for extra bases
included at checkout)
(1) ARH Rod Holder With 1.5" X 4"
Cleat Mount Base $84.95 Each (Enter
Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
(2)
ARH
Rod Holders
With 1.5" X 4" Cleat Mount Base At $74.95
Each (Enter Qty 1 At Pay Pal Screen)
(shipping included in price at checkout)
(3)
ARH
Rod Holders With 1.5" X 4" Cleat
Mount Base
At $74.95
Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
(4)
ARH
Rod Holders
With 1.5" X 4" Cleat Mount Base At $74.95
Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
(1) ARH Rod Holder With 3.0" Square Base
Mount $84.95 Each (Enter
Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
(2)
ARH
Rod Holders
With 3.0" Square Base Mount At $74.95
Each (Enter Qty 1 At Pay Pal Screen)
(shipping included in price at checkout)
(3)
ARH
Rod Holders With 3.0" Square Base
Mount
At $74.95
Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
(4)
ARH
Rod Holders
With 3.0" Square Base Mount At $74.95
Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
3" Square Base Mount Only
$15.95
Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
1.5" X 4.0"
Cleat Base Mount $13.95 Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
"The Shorty" two rod holders,
"T" bar and base mount.
One Rod Holder At $54.95 Each (Enter
Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
Two
Rod Holders At $45.95
Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
Three
Rod Holders At $45.95
Each (Enter Qty 1 At Pay Pal Screen) (shipping
included in price at checkout)
Four
Rod Holders At $45.95
Each (Enter Qty 1 At Pay Pal Screen)
(shipping
included in price at checkout)
Night Fishing Lights
I put together a night fishing light
that attaches to my rod holder setup. It took me a while to find a
supplier for flood lights that would work with the rig and still be
cost effective.
Of course the whole thing is made
out of steel. The light in the picture above is not the one I use for production units. The new light is round and more
adjustable. The assembly simply slides over the "T" bar
support and tightens down with a wing nut. The light extends about
24" out over the water. This allows you to fish directly over
the light with various length rods. No hot lanterns in the boat. And
it rock steady.
Big waves come by, no problem. It's not going
to break or fall in. Obviously these are designed to be above the
water, not in it. So don't submerge them. The light itself is in a
water proof case. When you're
done, disconnect it from the battery (not supplied) and store in
your rod locker. I'm going to sell these for $50.95 plus $10.00
shipping. The rod holder is sold separately. Send me an email if you
have questions.
Crappie
Killer Jig Heads - No longer available
*
Shipping and handling is for UPS™ Ground or equivalent,
shipped in the
contiguous United States. Alaska, Hawaii
and outside the U.S. higher shipping
rates will apply. *
We do not offer returns on rod holders or night lights as they are
considered custom products!
|
